Light steel keel rolling forming machine for steel house

Product Details

Full set of equipment, light steel keel rolling forming machine for steel house

Light steel keel extruded by fully automatic light steel keel rolling forming machine is a special metal skeleton for light steel structure building, which is rolled by cold bending I process with high quality galvanized steel strip as raw material. It is widely used in light steel structure housing engineering.

The light steel keel rolling forming machine produced by our company adopts imported high-end PLC computer centralized programming control system, imported variable frequency speed motor control machine high-speed hydraulic automatic cutting device (forward/rear cutting) fixed length cutting, forming product size stable and accurate.

The profile structure produced by light steel keel rolling forming machine is safe and reliable. Because of its high strength and stiffness, the structure made of Light steel keel is very safe and reliable. For example, when a partition with a width of 50-1.50 mm is made of light steel keel with a height of 3.25-6.00 m, the maximum deflection of light steel keel of partition wall can meet the requirement of the standard that the maximum deflection of light steel keel of partition wall is not greater than 1/20 of the height under 250 N/m0 uniform load.

Light steel keel rolling forming machine equipment produces profiles with good impact resistance. The partition wall is composed of light steel keel and plasterboard with 9 - 18mm thickness. Its longitudinal fracture load is 390 - 850N, so its impact resistance is good. The seismic performance is good. Light steel keel and surface layer are usually fixed by sliding connectors such as shooting nails, core-pulling rivets and tapping screw, which have good seismic performance. Under the action of seismic shear force, the partition only produces support sliding, while the light steel keel and the surface itself have little force and will not cause damage.