Home » Product » Ceiling/drywall participation machine » Metal rail and track machine for ceiling and drywall
metal rail profile from Algeria rail and track rail and track machine metal rail profiles from Algeria

Metal rail and track machine for ceiling and drywall

1006

Metal rail and track machine for ceiling and drywall allows you to do the make the Metal rail and track machine in batch fully automatic. The following drawing profile is from Algeria for your reference:
metal rail profile from Algeria
metal rail profiles from Algeria
And there are some drawing profiles like wall angle, U track and others. Here I will not list all of them. Take above two drawing profile as sample. For machine we design like following:
rail and track machine
Those two profiles could work at the same time. One worker can operate the whole production.

Here are some parameters for your reference:

Decoiler x2

Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system
Loading capacity: 1.5TUncoiling width: 300mm
Inner diameter: 450-550mm

Feeding and leveling

This part will level coil to make sure it is neat clean and straight.

Main Machine

Size: 4800х1800х1400Weight t: 4.2tons
Voltage:380V/50HZ3Phase(as customer’s request)
Roller fixer : Guide column
Frame : middle plate welded
Memorial arch frame type
Frame thickness:25mm
Drive mode: gear
Material of rollers: GCr12MoV
Material of shafts: 40Cr steel with tempering
Diameter of shafts: φ40mm
Number of rollers for studl :11rollers
Number of rollers for wall angel :9 rollers
Main power: 3kw for each part                
Cycloidal planetary gear speed reducer

Punching logo

This part will help you press your company logo on the finished products.
Power: hydraulic
Note, if you need, please tell me in advance this price does not include.

Shearing machine

Material of blades: Gcr12 quenched
Power supply : hydraulic power
Frame : Pillar style with rack & pinion system
Stroke switch :  non-contact photoelectric switch
We will give 9 pieces of cutting balde for you to change to fix those different drawing profiles.

Hydraulic Station

Hydraulic motor Power: 3kw for each one
Hydraulic oil: 46#
Components: The system includes a set of hydraulic tank, a set of hydraulic oil pump, and two hydraulic pipes. And three sets: one is for punching hole; one is for printing words and one for cutting.  Sets of electromagnetism valves.

Here are rail and track finished product pictures for your reference:

rail and track

Hot Products

online service
online service